Navitek Airkos Imprimer Imprimer

Navitek 13 Airkos

Key Advantages

The Navitek® S13 combines the best of autodarkening protection for welding, with one of the largest clear grinding visors available on the market. The Navitek® shell and all its polycarbonates are certified for grinding with the specific standards EN 166B and EN 175B. The visor is made in perfectly clear 1,0mm thick polycarbonate.

The excellent ergonomics provides perfect protection of the forehead, the ears and the neck.
This high comfort level can be advanced once equipped with side vision in shade DIN 5: the Navitek® S13 then provides a 160° vision to the welder, for improved safety and advanced comfort. These side vision are made out of transparent shade DIN 5 polycarbonate.

The Navitek® S13 is equipped with the longitudinal headgear with 4 settings: height, width, angle, and longitudinal adjustment for welders operating with corrective glasses.

Positionned into the liftable front frame, The new autodarkening S13 presents 2 major advantages:
1 - A revolutionary autodarkening filter restituting colors and enhancing contrasts.
2 - An extra-large viewing area in a light and ergonomic helmet.

The S13 is indeed equipped with a specific glass-pack: the vision of colors and contrasts, in both grinding and welding phases, is outstanding and uncomparable. This true vision greatly improves the general quality of the welding cords, relieves the operator from stress and over-concentration, and make possible digital display reading.

In addition, the viewing area of the S13 has been extended to 100x67mm, with a perfect positioning and centering. This extra-large viewing area offers excellent optical classes 1/1/1/2.
The 4 arc sensors are associated to a very fast switching speed of 0,1ms for a flawless detection of the welding arc, with all welding processes: electrodes, MIG/MAG, TIG and micro-TIG.
2 ranges of welding shades are available to the welder: from DIN 5 to DIN 8, and from DIN 9 to DIN 13, in addition to the sensitivity level of the 4 arc sensors, and the delay which can be adjusted from 0,1s to 1,9s.
All the settings and parameters on the S13 are visible in a large and internal digital display, directly in front of the welder.
All control knobs on the S13 are soft-touch, making it easy to adjust even with gloves on.

The S13 is covered by a full 3-year warranty.

When associated to the Airkos®, the Navitek® S13 helmet provides the filtration of Solid and Liquid Particules (PSL). The bolted and flame retardant face seal guarantees a limited TH2 inward leakage inside the headtop. The main filter on the Airkos® is classified as « Re-usable » (PRSL), and does not need to be replaced after every shift. The visual and sound alarm will inform the operator when to replace the filter.
The PRSL filter of the Airkos® is equipped with a pre-filter, blocking the largest particules and extending the lifecycle of the main filter. As an option, a pre-filter with active charcoals is available.

The Airkos® blower unit (PAPR) is approved and certified according to the EN 12941 standard, with and only with the Navitek® headtop. Cf certificate below :

PDF - 364.4 kb

Completing the alarm for the clogged filter, the filtration unit is also equipped with a distinctive alarm for the battery, informing the operator when the charge is running low.

The Airkos® is delivered with a standard 4-cell Lithium-ion battery. A _ heavy-duty battery with 6 Lithium-ion cells is also available. When equipped with the standard battery (CR7020), the Airkos® can provide up to 10 hours of operating time (with a new filter and on minimum airflow). Once equipped with the heavy-duty battery (CR7021), the Airkos® offers up to 15 hours, under the same conditions.

According to the welding application, the close environment and the operator’s habits, it is possible to select between 2 airflows on the Airkos®. 180l/m is the minimum airflow. With a simple push on the control knob, the unit increases the airflow to 220l/m.

A very large and padded belt provides an excellent comfort and a perfect support of the blower unit. As options, a padded harness and/or a belt extension are available to complete the existing belt.

Each Navitek® S13 Airkos is delivered with its own storage bag. The Airkos® storage bag is perfect for transport and stock of buffer spare parts.

Price request

Technical specs
LC technology Twisted Nematic
Optical Classes 1/1/1/2
Sensitivity setting Stepless
Standards EN12941
Warranty 1 year on battery and motor
Outside protection Clear polycarbonate
Filtration TH2PSL
Sound alarm Clogged filter
Battery Lithium-Ion - Removable
Charger 6 hours smart charge (for CR7020)
Belt Large and padded Neoprene
Spark protection Indirect filter cover
Hose cover Included - Flame retardant
Grinding Yes - Clear grinding visor
Airflow 180l/m and 220l/m
Operating time 9-10 hours
Sound alarm Low battery charge
Arc sensors 4 - Independent
Switching speed 0,1ms
Power Solar + replaceable batteries
Applications Electrodes, MIG/MAG, TIG, Micro-TIG, Cutting
Delay setting From 0,1s to 1,9s
Weight 1180g (unité+batterie+ceinture+filtre)
Welding shade Variable DIN 5-8 and DIN 9-13
Side vision Shade DIN 5 polycarbonate
Vision TrueColors* Colors/Contrats restitution
Viewing area 100 x 67mm

Outside protection plate (x10) AX 4000
Inside protection plate (x10) AX 2360
Lithium battery (x2) AX 2715
Visor polycarbonate (x5) AX 3415
Sweatband (x2) AX 1140
Headgear with airduct CR 7025
Large padded belt CR 7001
Optional confort harness CR 7002
Belt extension CR 7003
Air hose with connections CR 7010
Flame retardant hose cover CR 7012
Standard Lithium-ion battery CR 7020
Heavy-duty Lithium-ion battery CR 7021
Lithium-ion battery european charger CR 7022
Lithium-ion battery international charger CR 7023
Navitek* flame retardant face seal CR 7032
PRSL main filter CR 7050
Pre-filter (x10) CR 7060
Pre-filter with active carbons (x10) CR 7070
Storage bag CR 7090

  • Navitek S13 Airkos CR38S13
  • Navitek S13 Side Vision Airkos CR58S13


Associated items